7. MAINTENANCE, TROUBLESHOOTING

7.4.2Radar

Requires a network radar.

Radar troubleshooting

If…

But…

Then…

you pressed the

nothing appears on the display

! check that the signal cable between the

[POWER/BRILL] key and

 

display unit and the antenna is firmly

the RADAR TX soft key to

 

fastened.

show the radar picture

 

! Check that radar source is correct.

marks, legends appear

no echo appears

! check in the power cable. If it is blown,

 

 

replace it.

picture not updated or

! check signal cable.

picture freezes

! turn the display unit off and on again.

 

tuning is adjusted

sensitivity is poor

! Magnetron may need to be replaced.

 

 

Contact your dealer.

range changed

radar picture does not change

! try to hit the [+] and [-] keys again.

 

 

! turn the display unit off and on again.

poor discrimination in

! adjust A/C SEA.

range

! Check heading and speed data for input.

 

true motion presentation

! reselect true motion mode.

not working properly

 

 

 

range rings are not

! Hit the RADAR DISPLY and RINGS soft

displayed

keys to display them.

 

7-4

Page 222
Image 222
Furuno 1752C, 1753C, 1733C, 1723C, 1762C, 1722C, 1763C, 1732C, 1742C manual Radar troubleshooting, If… But… Then…