Furuno 1742C, 1753C, 1733C, 1752, 1723C, 1762C, 1732, 1722C Connecting routes, Connect route window

3. PLOTTER OPERATION

3.9.2Connecting routes

Two routes which you have created can be connected as follows to form a new route.

1.Press the [MENU] key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the ROUTES soft key.

4.Press the NEW ROUTE soft key.

5.If desired, enter the name for the new route and enter comment.

6.Press the CONNECT soft key.

7.Use the cursor pad and the [ENTER] knob to enter the route name for the first route, beneath FIRST in the CONNECT ROUTE window.

ROUTE NAME

0 0 1

COMMENT

CONNECT ROUTE

FIRST SECOND

_ _ _ _ _ _ _ _ _ _ _ _

FORWARD FORWARD

NEW ROUTE

F < -- > R

SAVE

CANCEL

Connect route window

8.If necessary press the F< - ->R soft key to select direction to follow the waypoints of the route, forward or reverse.

9.Enter the route name of the second route as you did for the first route.

10.Press the SAVE soft key.

11.Press the [MENU] key to close the menu.

Note: The maximum number of waypoints in a route is 35. If this number is exceeded an error message appears. In this case, delete waypoints in one or both routes so the total number of waypoints does not exceed 35.

3-41