Furuno 1742, 1753C, 1733C, 1752, 1723C, 1762C, 1732, 1722C, 1763C Plotter function keys, RUL Ruler

5. CUSTOMIZING YOUR UNIT

4.Select function desired with the cursor pad or [ENTER] knob and press the ENTER soft key or [ENTER] knob to register your selection.

5.Press the RETURN soft key.

6.Press the [MENU] key to close the menu.

Plotter function keys

Menu Item	Function	Function Key Label
OFF	Assigns no function.	—
ADD: ADD NEW WPT	Registers waypoint at cursor position. Place	ADD
	cursor for waypoint location then press function
	key.
MWP: MOVE WPT	Moves selected waypoint to different position.	MWP
	Select waypoint then press function key.
RUL: RULER	Measures range and bearing between two	RUL
	points. Press START POINT soft key to change
	starting point if necessary. Range and bearing
	between two points appears at the top of the
	screen.
GWP: GOTO WPT	Specify waypoint to set as destination. Enter	GWP
	number in window and press the ENTER soft
	key.
GRT: GOTO ROUTE	Specify route to follow. Enter number in window	GRT
	and press the ENTER soft key.
EML: EDIT MK/LINE	Displays mark & line menu. Press appropriate	EML
	soft key to access menu item.
TRK: TRACK ON/OFF	Each pressing stops or starts recording of own	TRK
	ship track.
TTM: TTM ON/OFF	Turns TTM (target track) display on/off.	TTM
DTT: DEL TGT TRACK	Erases all TTM track.	DTT
ALP: ALPHA LIST	Displays waypoint alphanumeric list.	ALP
LCL: LOCAL LIST	Displays waypoint local list.	LCL
RTE: ROUTE LIST	Displays route list.	RTE
DBX: D. BOX ON/OFF	Shows/hides data boxes.	DBX
CHG: CHANGE	Changes control in combination screen.	CHG
CNTRL*

*: When selecting CHG on a display, use the same soft key number on all display for CHG.

5-11