3. PLOTTER OPERATION

Editing a waypoint from the plotter display

You may change/edit waypoints from the plotter display as follows:

1.Press the [MENU] key followed by the WAYPOINTS/ROUTES and WAYPOINTS soft key to open the waypoint menu.

2.Press the WAYPOINT BY CURSOR soft key.

3.Operate the cursor pad to place the cursor on the waypoint which you want to change. A flashing diamond mark appears on the waypoint when it is correctly selected.

4.Press the EDIT/MOVE soft key. Three soft keys replace the EDIT/MOVE soft key:

EDIT WPT: Edit from the waypoint entry window.

MOVE WPT: Move waypoint to new position with the cursor.

ERASE WPT: Erase waypoint, see paragraph 3.8.3.

5.Press appropriate soft key. If you pressed the EDIT WPT soft key the waypoint entry window appears; edit data as appropriate. For MOVE WPT do the following:

a)Operate the cursor pad to place the cursor on the location desired for the waypoint. A line connects previous position and new position.

b)Push the [ENTER] knob. The waypoint moves to the cursor position and its new position is recorded on the waypoint list. If the waypoint is set as destination or is part of a route, you are asked if you are sure to move the waypoint. In this case, push the [ENTER] knob to move the waypoint, or press the [CLEAR] key to cancel.

6.Press the MENU key to finish.

Range and bearing from own ship to cursor

+

34° 22.

3456'N

359.9° M

TRIP NU

080° 22.

3456'E

59.9 nm

99.9 nm

 

 

 

 

 

16.0nm

 

 

 

Press to alternately display

(1) Select waypoint to move,

 

 

range/bearing from own ship

then press EDIT/MOVE

 

RNG

to cursor, range/bearing from

and MOVE WPT soft keys.

FISH

BRG

original waypoint position to

 

(2) Drag cursor to new position,

 

 

cursor position.

 

 

Below is an example of the

then push the [ENTER] knob.

 

 

 

 

range/bearing from original

 

 

 

 

 

CANCEL

waypoint position to cursor

 

 

position.

 

 

 

WP-002

BRIDGE

 

 

 

 

 

+

34° 22.

3456’N

FROM

5.3° M

 

 

 

 

 

080° 22.

3456’E

FISH

1.45 nm

 

 

 

 

 

 

 

Plotter display

3-33

Page 117
Image 117
Furuno 1753C, 1742, 1733C, 1752, 1723C, 1762C, 1732, 1722C, 1763C Editing a waypoint from the plotter display, Plotter display