Furuno 1753C, 1742, 1733C, 1752, 1723C, 1762C, 1732, 1722C Pulselength, Signal process soft keys

2. RADAR OPERATION

2.8Pulselength

The pulselength in use is displayed at the upper left corner of the display. Appropriate pulselengths are preset to individual range scales. Therefore, you are not usually required to select them. If you are not satisfied with the current pulselength setting, however, it is possible to change it for the 1.5 and 3 nm (sm) ranges (3 and 6 kilometer ranges) as below. Generally, select a longer pulse for longer detection range and shorter pulse for better range discrimination.

1.5nm, 1.5 sm, 3 km: Short pulse, medium pulse 3 nm, 3 sm, 6 km: Middle pulse, long pulse

1.Press [HIDE/SHOW] key to show the radar soft keys.

2.Set the range to 1.5 or 3 nm, whichever you want to set.

3.Press the SIGNAL PROC. soft key.

1.5/	.500nm	° M	SIGNAL
	SP	319.9	PROCESS
H-UP
			I. REJ
			LOW

E. AVG	Shown when radar
OFF
	source is the Model
PULSE	1833/C series
SHORT	network radar. Not
E. STR	shown otherwise.
LOW

RETURN

+359.9° R 1.40nm

Signal process soft keys

4.Press the PULSE soft key to select the pulselength setting. SHORT or MEDIUM for 1.5 nm, 1.5 sm, 3 km and MEDIUM or LONG for 3 nm, 3 sm, 6 km.

5.Press the RETURN soft key to finish.

2-8