Furuno 1753C, 1742, 1733C, 1752, 1723C, 1762C GPS receiver setup Set equipped with GP-310B/320B

5. CUSTOMIZING YOUR UNIT

5.7.2GPS receiver setup (Set equipped with GP-310B/320B)

The GPS SETUP menu sets up the GPS Receiver GPS-310B/320B. Press the [MENU] key followed by the SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS soft keys to display this menu.

LOCAL TIME OFFSET	GPS
	SETUP
+00:00
GEODETIC DATUM
WGS-84	EDIT
POSITION SMOOTHING
000 second(s)
SPD/CSE SMOOTHING	GPS
005 second(s)
GPS SPEED AVERAGING	STATUS
060 second(s)
LATITUDE OFFSET
0.000’N	WAAS
LONGITUDE OFFSET	SETUP*
0.000’E
DISABLE SATELLITE
_ _ _ _ _ _
LATITUDE
38 00.000’ N
LONGITUDE
123 00.000’ E	RETURN
ANTENNA HEIGHT
005 m
GPS FIX MODE
2D/3D
COLD START
NO

*: Only when the GP-320B is connected.

GPS sensor setup menu

Contents of GPS setup menu

Item	Description	Settings	Default Setting
Local Time Offset	Lets you use local time (instead of UTC time). Enter time	-13:30 to +13:30	00:00
	difference between local time and UTC time. Set this item	hours
	when using the GPS-310B/320B.
Geodetic Datum	Note: Geodetic Datum is a reference for geodetic survey	See Appendix for full	WGS-84
	measurements consisting of fixed latitude, longitude and	list.
	azimuth values associated with a defined station of
	reference. You must have the correct Geodetic Datum
	selected in your plotter so that it will reference the correct
	point on the chart for a given lat / lon. Although WGS-84
	is now the world standard, other categories of charts still
	exist. refer to Appendix for a full list of geodetic datum.
Position Smoothing	When the DOP or receiving condition is unfavorable, the	0-999 sec	0 sec (no position
	GPS fix may change greatly, even if the vessel is not		smoothing)
	moving in water. This change can be reduced by
	smoothing the raw GPS fixes. A setting between 000 to
	999 is available. The higher the setting, the more
	smoothed the raw data. If the setting is too high, the
	response time required to show a change of Lat and LON
	will be too long. this is especially noticeable if the vessel
	is moving fast. This is especially noticeable at high ship’
	speeds. Increase the setting to increase the amount of
	averaging applied to the GPS fix.

(Continued on next page)

5-24