Radar function keys, Menu Item Function | Furuno 1752C, 1753C, 1742

5.CUSTOMIZING YOUR UNIT

4.Select function desired with the cursor pad or [ENTER] knob and press the ENTER soft key or [ENTER] knob to register your selection.

5.Press the [MENU] key to close the menu.

Radar function keys

Menu Item	Function	Function Key Label

OFF	Assigns no function.	—

HL: HDG LINE OFF	Turns heading line off.	HL

MOD: MODE	Selects presentation mode.	MOD

GAI: GAIN	Shows gain sensitivity adjustment window.	GAI

SEA: A/C SEA	Shows manual or A/C SEA adjustment window.	SEA

RAI: A/C RAIN	Shows A/C RAIN adjustment window.	RAI

FTC: FTC	Displays FTC window. Adjust FTC with the [ENTER] knob.	FTC

ES: ECHO STRETCH	Turns echo stretch on/off.	ES

PLS: PULSE LENGTH	Sets pulselength (long or short).	PLS

ZOM: ZOOM	Turns zoom on/off.	ZOM

SFT: OFFCENTER	Press to shift display center to cursor location. Press again to	SFT
	turn shift off and return cursor to display center.
TRL: ECHO TRAIL	Starts/stops echo trails.	TRL

RNG: RINGS ON/OFF	Turns range rings on/off.	RNG

TLL: TLL OUTPUT	Outputs cursor position, in NMEA format, to navigator.	TLL

ALM: GUARD ALARM	Displays alarm soft keys.	ALM

EBL: EBL	Switches control between EBL1 and EBL2 with each press.	EBL

VRM: VRM	Switches control between VRM1and VRM2 with each press.	VRM

TTM: TTM ON/OFF	Turns TTM (Tracked Target (Message) data on/off.	TTM

WMK: WPT ON/OFF	Turns waypoint marker on/off.	WMK

WTM: WATCHMAN	Turns watchman on/off.	WTM

ACQ: ACQUISITION	Acquires and tracks cursor-selected target.(Requires	ACQ
	ARP-equipped Model 1833/1833C series network radar.)

TX: STBY/TX	Toggles between standby and transmit.	TX

RSR: RADAR SOURCE	Selects source for radar picture.	RSR

DBX: D. BOX ON/OFF	Turns data boxes on/off.	DBX

CHG: CHANGE CNTRL*	Changes display control in combination display.	CHG

*: When selecting CHG on a display, use the same soft key number on all display for CHG.

5-8