Furuno 1752C, 1753C Selecting a display, Full-screen selection window overlay for color model

1. OPERATIONAL OVERVIEW

1.6.2Selecting a display

1.Press the [DISP] key to show the full-screen selection window. The icons of modes not available are marked with “X” mark. PAGE1-PAGE5 are user-arrangeable displays called “hot pages,” which you can configure as you like. For further details, see “5.6 Hot Page Setup.”

RADAR PLOT SNDR NAV OVRLY

PAGE1 PAGE2 PAGE3 PAGE4 PAGE5

·TURN KNOB TO SELECT MODE AND PUSH KNOB TO ENTER.

·PUSH ANY SOFT KEY TO SELECT IMAGE SOURCE.

Basic display screens

Hot pages

Full-screen selection window (“overlay” for color model)

2.Rotate the [ENTER] knob to select a basic display screen or a hot page screen.

3.Push the [ENTER] knob. If you selected a basic display screen, a set of combination display screens corresponding to the basic display screen that was selected appear. In the example below, radar combination displays are shown.

PUSH ENTER KNOB.

Radar combination screen selection window

4.Operate the [ENTER] knob to select the combination screen display desired and push it to set.

1-12