Furuno 1742C, 1753C, 1733C, 1752, 1723C, 1762C, 1732, 1722C, 1763C Plotter Setup, Navigation options

5. CUSTOMIZING YOUR UNIT

5.3Plotter Setup

This paragraph provides the information necessary for setting up the plotter display.

5.3.1Navigation options

Navigation options, for example, waypoint switching method, may be set on the plotter setup menu.

1.Show the plotter display and press the [MENU] key open the main menu.

2.Press the PLOTTER SETUP soft key.

WAYPOINT SWITCHING ARRVL ALM CRCL

COURSE VECTOR

LINE

SET GOTO METHOD 1POINT

QP

INTERNAL

PLOTTER SETUP

EDIT

D. BOX

RETURN

Display option menu

Contents of display option menu

Item	Description	Settings	Default Setting
Waypoints	Chooses waypoint switching method. See	Perpendicular, Arrvl	Arrvl Alm Crcl
Switching	“switching waypoints” on page 3-51.	Alm Crcl, Manual
Course Vector	You may extend a line from the own ship	Line, Vector, Off	Line
	position to show ship’s course. It may be a
	vector (length depends on ship’s speed) or a
	simple line (course bar)
Set GOTO	Sets the method by which to navigate to a	1 Point, 35 Points,	1 Point
Method	quick point. See paragraph “3.10.1 Navigating	35 Pts/Port Service
	to a quick point.”
QP	To display destination waypoint from an	EXT WPT (RMB),	INTERNAL
	external navigation connected, select “EXT	INTERNAL
	WPT (RMB).”
D. BOX	Sets up data boxes. See paragraph 5.5.
(soft key)

5-9