Furuno 1722C, 1753C Restarting navigation, Example of when to restart navigation, Log display

3. PLOTTER OPERATION

Restarting navigation

When you steer to avoid an obstacle or the vessel drifts, you may go off your intended course, as in Line 1 in the figure below. Also, if you don’t need to return to the original course, you can go directly to the next waypoint, as in Line 2 in the figure below. In these cases, use the restart function to restart navigation.

Line 2

Line 1

Obstacle

Original course

Example of when to restart navigation

1.Press the [MENU] key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the LOG soft key.

Destination waypoint (WPT name against bright background)

Passed waypoint (gray characters)

Estimated Time of Arrival at destination

ETA 23:59 11.FEB

		01		001WPT		LEG
		34° 44.111'N
		135° 21.134'W				29.9°
		02		003WPT		12.0nm
	▲
		34°		43.432'N
		135°	41.456'W			159.9°
						6.00nm
		03		002WPT
		34° 14.124'N
Replaces triangle		135°	21.567'W			50.5°
		04		005WPT		29.8nm
when selecting a
		34° 44.569'N
route leg.		135° 21.152'W			359.9°
		05		008WPT		3.0nm
		34° 54.124'N
		135° 21.888'W

LOG

RE-

START

STOP

RVRSE

SPEED

COORD

TYPE

Replaced by

"FOLLOW LEG" when selecting a route leg.

Log display

4.Use the cursor pad to select a waypoint or a route leg. When a route leg is selected the single arrow cursor is replaced by double arrows.

5.Press the RESTART soft key, or FOLLOW LEG soft key in case of route leg.

Note: Navigation may be restarted from the plotter display, with the RESTART key, when a single quick point (QP<01>) is selected for navigation.

6. Press the [MENU] key to close the menu.

3-50