Furuno 1753C, 1742, 1733C, 1752, 1723C, 1762C, 1732, 1722C, 1763C Data Boxes Setup, Data box menu

5. CUSTOMIZING YOUR UNIT

5.5Data Boxes Setup

You may select the data to show in the data boxes for the plotter, radar and sounder displays. Six boxes may be displayed in case of small size data box and two for large size data box.

1.Display the plotter, radar or sounder display, whichever you want to set.

2.Press the [MENU] key to open the main menu.

3.Press one of the following sets of soft keys depending on the display selected at step 1.

Radar mode: RADAR DISPLAY SETUP, D. BOX

Plotter mode: PLOTTER SETUP, D. BOX

Sounder mode: SOUNDER MENU, D. BOX

▲
DATABOX SIZE
SMALL
POSITION	ON
WAYPOINT	OFF
COG	ON
SOG	ON
STW	OFF
BEARING	OFF
RANGE	OFF
TIME TO GO	OFF
ETA	OFF
TEMPERATURE	OFF
DEPTH	OFF
TRIP LOG	ON
DATE	OFF
TIME	OFF
WIND	OFF

DATA BOX

EDIT

RETURN

Data box menu

4.Use the cursor pad to select an item and then press the EDIT soft key.

5.Select ON or OFF as desired.

6.Press the ENTER soft key or the [ENTER] knob to register your selection. Six items may be set to ON for small data boxes; two for large data boxes.

7.Repeat steps 4-6 to turn other items on or off.

8.Press the [MENU] key to close the menu

5-20