3.PLOTTER OPERATION

6.Choose how to record points for your route, by time, by distance or manual entry pressing by one of BCKTRK TIME, BCKTRK RANGE or MANUAL soft key as appropriate. For manual go to step 8. For BCKTRK TIME, BCKTRK DIST one of the following displays appears.

TIME INTERVAL

00h01m

DISTANCE INTERVAL

00.1nm

(When selecting BCKTRK TIME.)

(When selecting BCKTRK DIST.)

Displays for entry of time, distance interval

7.Enter interval desired with the cursor pad and [ENTER] knob. Press the START LOG and RETURN soft keys followed by the [MENU] key to close the menu. At this moment, voyage based route will be created.

8.For manual entry of waypoints, do the following:

a)Press the [SAVE/MOB] key momentarily to enter a waypoint mark at own ship position. A new waypoint is created under the next consecutive waypoint number and that waypoint is added to the route. (You may close the SAVE ROUTE screen by pressing the RETURN soft by followed by the MENU key.)

b)Repeat step a) as necessary. 35 waypoints may be entered.

To stop recording waypoints and save the route

You can stop recording waypoints and save the route at any time as shown in the procedure below. When 35 waypoints have been entered the message “Total 35 WPTS have been already registered in the route. Stop creating voyage based route.” is displayed. In this case, automatically creating voyage-based route stops.

1.Press the [MENU] key followed by the WAYPOINTS/ROUTES and CREATE VOYAGE-BASED ROUTE soft keys.

2.Press the FINISH LOG soft key to stop recording waypoint and save the route.

3.Press the [MENU] key to close the menu.

3-40

Page 124
Image 124
Furuno 1752C, 1753C, 1742 Displays for entry of time, distance interval, For manual entry of waypoints, do the following