Furuno 1732, 1753C, 1742, 1733C, 1752, 1723C, 1762C, 1722C Outputting TLL Data, Target soft keys

2. RADAR OPERATION

2.21Outputting TLL Data

Target position data can be output to units of the network and shown on their plotter screen, with the waypoint mark. This function requires position and heading data.

1.If not displayed, press the [HIDE/SHOW] key to display the radar soft keys.

2.Operate the cursor pad to place the cursor on the target whose position you wish to output.

3.Press the TARGET soft key.

.250/	.125nm	319.9	° M
			TARGET
SP
H-UP

TRAIL

TLL

OUTPUT

ACQ

TARGET

INFO

RETURN

+359.9° R 0.240nm

Shown with selection of 1833/C series network radar equipped with ARP function as source.

Not shown otherwise.

TARGET soft keys

4.Press the TLL OUTPUT soft key to output target position data.

5.Press the RETURN soft key to finish.

Note: The screen of the TLL recipient may be temporarily interrupted when receiving TLL from another NavNet display unit. Press any key to restore normal operation.

2-29