Furuno 1733C, 1753C, 1742, 1752, 1723C, 1762C, 1732, 1722C, 1763C Contents of Waas Setup menu

5. CUSTOMIZING YOUR UNIT

WAAS SETUP

Press the WAAS SETUP soft key to show the WAAS SETUP display.

Note: This function requires GP-320B antenna. Also, confirm that your display unit has the program version no. shown below.

NavChart type: Ver. 12 and after

C-map type: Ver.8 and after

Contents of WAAS SETUP menu

Item	Description	Settings	Default setting
WAAS MODE	Select ON to use the WAAS mode.	On, Off	Off
WAAS SEARCH	WAAS satellite can be searched	Auto, Manual	Auto
	automatically or manually. For manual
	search, select MANUAL here, and enter
	the satellite number (s).
WAAS ALARM	When the positioning mode is changed	On, Off	Off
	from WAAS to GPS, the audible alarm
	sounds with the visual message “NO
	WAAS SIGNAL.” This audible alarm type
	can be changed here.
	On: Alarm continues to sound until the
	WAAS positioning mode is available again
	or the alarm is recognized by key
	operation.
	Off: Alarm sounds three times.
CORRECTION	Selects the type of message for WAAS	00 to 27, 99	02
DATA SET	correction. Use setting “02” until the
	system becomes operational, which should
	be in 2003.

Note: If the message “NO POSITION DATA!” appears, it means an error occurs on GPS-310B/320B. Disconnect GPS cable from the display unit.

5-26