Furuno 1733C, 1753C, 1742, 1752, 1723C, 1762 Water Temperature Graph, Changing Pulse Repetition Rate

4. VIDEO SOUNDER OPERATION

Alarm messages

The table below shows the sounder alarm messages and their meanings

Sounder alarm messages and their meanings

Message	Meaning
DEPTH ALARM!	Bottom alarm violated.
FISH ALARM!	Fish alarm violated.
TEMPERATURE ALARM!	Water temperature alarm violated.

4.13Water Temperature Graph

The water temperature graph (appropriate sensor required) plots water temperature on the sounder display. (See the figure on page 4-3.) It can be turned on or off as below.

1.Press the [MENU] key to open the menu.

2.Press the SOUNDER MENU soft key.

3.Select TEMPERATURE GRAPH and press the EDIT soft key.

4.Select OFF (default setting) or ON as appropriate.

5.Press the ENTER soft key.

6.Press the [MENU] key to close the menu.

4.14Changing Pulse Repetition Rate

Pulse repetition rate can be changed. Normally, the highest rate (20) is used. When in shallow waters, second reflection echoes may appear between surface and actual bottom echo. In this case lower the PRR level. The option “SPD SENSING PRR” means the ship’s speed dependent mode, where the PRR changes automatically with ship’s speed (required speed input.) For further information about the ship’s speed dependent mode, see page 4-17.

1.Press the [MENU] key to open the menu.

2.Press the SOUNDER MENU soft key.

3.Press the cursor pad to select PRR LEVEL.

4.Press the EDIT soft key to open the setting window.

5.Use the cursor pad to select he rate for repetition.

6.Press the ENTER soft key followed by the [MENU] key to close the menu.

Too small setting reduces the number of pulse repetition. This may cause a problem to search fish schools. Select “20” unless multistage reflections appear on the display.

4-24