§

3. PLOTTER OPERATION

 

 

 

LINES STYLE

 

Line style window

3. Use the cursor pad to select line style desired and press the ENTER soft key.

Line style “dot” disables line drawing. The edge of lines is determined by mark shape. For example, selecting the circle shape will join lines with a circle as below.

4. Press the [MENU] key twice to close the menu.

3.7.4Erasing marks, lines

Erasing an individual mark

1.Operate the cursor pad to place the cursor on the mark you want to erase.

2.Press the [CLEAR] key to erase the mark.

Erasing an individual line

Place the cursor on an end of the line to erase and press the [CLEAR] key. Placing the cursor at the intersecting point of two line segments will erase both line segments.

Erasing marks, lines by area

This function is not available on the overlay area (MODEL1722C/1723C series).

1.Press the [MENU] key followed by the CHART SETUP, TRACKS & MARKS CONTROL and ERASE T & M soft keys to show the ERASE menu.

2.Use the cursor pad to select ERASE MARKS BY AREA and press the EDIT soft key. The menu is erased and the plotter display appears.

3.Use the cursor pad to place the cursor at the top left-hand corner of the area which is to enclose the marks/lines to erase.

4.Press the START soft key or the [ENTER] knob.

5.Drag the cursor to the bottom right-hand corner of the area which is to enclose the marks/lines to erase.

6.Press the END soft key or the [ENTER] knob. You are asked if it is all right to delete the marks/lines selected. Press the [ENTER] knob to delete.

7.Press the [MENU] key twice to close the menu.

3-27

Page 111
Image 111
Furuno 1742C, 1753C, 1733C Erasing marks, lines, Line style window, Erasing an individual mark, Erasing an individual line