2. RADAR OPERATION

2.25.4Terminating tracking of ARP targets

When 10 targets have been acquired, no more targets may be acquired unless targets are cancelled. If you need to acquire additional targets, you must first cancel one or more individual targets, or all of the targets, using one of the procedures below.

Terminating tracking of selected targets

1.Place the cursor on the target to terminate tracking.

2.Press the [CLEAR] key to erase to terminate tracking and erase the target.

Terminating tracking of all targets

1.Press the [MENU] key followed by the ARP SETUP soft key.

2.Select CANCEL ALL TARGETS.

3.Press the EDIT soft key.

CANCEL ALL TARGETS

§

°YES NO

Cancel all targets window

4.Select YES.

5.Press the ENTER soft key.

6.Press the [MENU] key to close the menu.

2-38

Page 72
Image 72
Furuno 1733C Terminating tracking of ARP targets, Terminating tracking of selected targets, Cancel all targets window