Furuno 1762C, 1753C, 1742, 1733C Contents of general menu, Description Settings Default Setting

5. CUSTOMIZING YOUR UNIT

Contents of general menu

Item	Description	Settings	Default Setting
Key Beep	Turns key operation beep on/off.	On, Off	On
Language	Chooses menu language.	English, French, German,	English
		Italian, Portuguese, Spanish
Range Unit	Chooses unit of range and speed measurement.	nm, kt; km, km/h; sm, mph; nm	nm, kt
		& yd, kt; nm & m, kt; km & m,
		km/h; sm & yd, mph
Temperature Unit	Chooses unit of water temperature measurement.	° C, ° F	° F
Depth Unit	Chooses unit of depth measurement.	ft, m, fa, PB (Passi/Braza)	ft
Temperature	Chooses source of water temperature data.	ETR (network sounder), NMEA	NMEA
Source
Depth Source	Chooses source of depth data.	ETR, NMEA.	NMEA
Reset Trip Log	Resets distance run.	Yes, No	No
Speed Source	Chooses source of own ship’s speed data.	ETR, NMEA	NMEA
Lat/Lon Display	Chooses how many digits (or seconds) to display	DD° MM.MM’, DD° MM.MMM’,	DD° MM.MMMM’
	after decimal point in latitude and longitude	DD° MM.MMMM’,
	position.	DD° MM’SS.S”
TD Display	Chooses TD type.	Loran C, Decca	Loran C
Speed	Chooses speed format to display.	SOG (Speed over ground),	SOG
		STW (Speed through water)
Position Display	Chooses position display format.	LAT/LON, TD	LAT/LON
Time Display	Chooses time notation.	12 hours, 24 hours	24 hours
Infrared Remote	A remote controller can be set exclusively	A, B, C, D	A
Mode	for use with a specific display unit, in the
	case of multiple NavNet display units. For
	further details see the Installation Manual.
Range & Bearing	Chooses how to calculate range and bearing.	Rhumb Line: Straight line	Rhumb Line
Mode		drawn between two points on a
		nautical chart.
		Great Circle: Shortest course
		between two points on the
		surface of the earth.
Bearing Readout	Chooses bearing display format for course, course	True, Magnetic	Magnetic
	over ground and cursor bearing.
Magnetic	The magnetic variations for all areas of the earth	Auto, Manual	Auto
Variation	are preprogrammed into this unit. The
	preprogrammed variation is accurate for most
	instances, however you may wish to manually
	enter a variation. For manual input, select Manual,
	hit the EDIT soft key, enter value and hit the
	ENTER soft key to finish. “AUTO” requires position
	data.
Display Mode	Reverses background (black) and foreground	Day, Night	Day
(Monochrome	(white) colors.
model)

*Select ETR to show water temperature/depth data fed from the network sounder, and then set the TEMP and DEPTH CALIBRATION of the SENSOR SETUP in the SOUNDER SYSTEM SETUP menu.

5-2