3. PLOTTER OPERATION

3.9.4Removing waypoints from a route

Removing a waypoint from the route list

1.Press the [MENU] key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the ROUTES soft key.

4.Select a route.

5.Press the EDIT ROUTE and LOCAL LIST soft keys.

6.Select the waypoint you want to remove.

7.Press the REMOVE WPT soft key.

8.Press the [MENU] key to close the menu.

Removing a waypoint from the plotter display

1.Press the [MENU] key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the ROUTES soft key.

4.Select a route.

5.Press the EDIT ROUTE soft key.

6.Press the PLOT soft key to show the plot screen.

7.Operate the cursor pad to place the cursor on the waypoint you want to remove from the route.

8.Press the REMOVE WPT soft key. The route is redrawn, eliminating the waypoint erased.

9.Press the [MENU] key to close the menu.

3.9.5Erasing routes

1.Press the [MENU] key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the ROUTES soft key.

4.Use the cursor pad to select a route.

5.Press the ERASE ROUTE soft key. You are asked if you are sure to erase the route.

6.Push the [ENTER] knob to erase the route, or the [CLEAR] key to escape.

7.Press the [MENU] key to close the menu.

3-44

Page 128
Image 128
Furuno 1733C, 1753C, 1742, 1752 Removing waypoints from a route, Erasing routes, Removing a waypoint from the route list