3. PLOTTER OPERATION

4.Use the cursor pad to select WITHIN, OVER/UNDER, or OFF.

5.For WITHIN and OVER/UNDER, use the cursor pad and [ENTER] knob to enter alarm range: Use ◄ or ► to select digit; rotate the [ENTER] knob to set value.

6.Press the ENTER soft key or push the [ENTER] knob to register setting.

7.Press the [ALARM] key to close the menu.

3.11.6Proximity alarm

The proximity alarm alerts you when own ship nears a waypoint, which is marked with the proximity mark, by the proximity alarm radius set for that waypoint on the waypoint list. When own ship is within a waypoint’s proximity alarm radius, the alarm sounds. The proximity mark remains on the screen until the waypoint is erased. (Note that the MODEL1722C/1723C series show the proximity mark and dashed circle in red.)

Radius in proportion to proximity alarm radius, which is set on waypoint list

001WPT

Proximity mark

1.Press the [ALARM] key to open the alarm menu.

2.Use the cursor pad to select PROXIMITY ALARM.

3.Press the EDIT soft key to show the proximity alarm window.

PROXIMITY ALARM

§▲

°ON

OFF

▼

Proximity alarm window

4.Use the cursor pad to select ON or OFF.

5.Press the ENTER soft key or [ENTER] knob.

6.Press the [ALARM] key to close the menu.

3-57

Page 140 Page 142
Page 141
Image 141
Furuno 1753C, 1733C, 1723C, 1762C, 1722C, 1763C, 1732C, 1752C, 1742C manual Proximity mark, Proximity alarm window
Page 140 Page 142
Top Page Image Contents