GE 60-960-95 Latchkey Report 030nnn5 where nnn=user number, Partition Master partition

Latchkey Report (030nnn5 where nnn=user number 00-229)

User Codes-Reg. User Codes-User NNN (Defaults: 00-05 = on, 06-229 = off)

This setting determines whether or not the user code causes a latch- key report to be sent to a pager when the code is used to change arming levels.

￿To assign the Latchkey Report attribute to user codes:

1.With the display showing USER CODES, press # and the display shows REGULAR USER

CODES.

2.Press # and the display shows USER nnn (first available user number).

3.Press A or B to select the desired user number, then press #. The display shows USER nnn - nnnn.

4.Press A or B until the display shows LATCHKEY OFF/ON (current setting).

5.Press 1 (off) or 2 (on). The display flashes the entered setting.

6.Press # and the display shows the new setting.

Partition Master (partition 1:		User Codes-Partition Master Code (Default = none)
0310, partition 2: 0311)
The Partition Master Code provides	￿To change the Partition Master Code:
access to all system operations and user	1.	With the display showing USER CODES, press # then A or B until the display
programming for a single partition.		shows PARTITION MASTER CODE.
Note	2.	Press # and the display shows PARTITION nnnn (current code).
You must be “in” the partition of the partition	3.	Enter a new 4-digit code. The display flashes the entered code.
master code you wish to change.	4.	Press # and the display shows the new code.
System Master (320)		User Codes-System Master Code (Default = 1234)

The System Master Code provides access to all sys- tem operations and user programming.

￿To change the System Master Code:

1.With the display showing USER CODES, press # then A or B until the display shows SYSTEM

MASTER CODE.

2.Press # and the display shows SYSTEM MASTER nnnn (current code).

3.Enter a new 4-digit code. The display flashes the entered code.

4.Press # and display shows the new code.

Options Menu

The OPTIONS menu lets you set up the system for downloading and silent arming. You can also adjust alphanumeric touchpad display brightness from this menu.

Downloading (040)			Options (Default = on)
When this setting is on, the panel can communicate with Tool-		￿To turn Downloading off or on:
Box® software for programming the system from off-site.		1.	Press A or B until the display shows OPTIONS.
Note		2.	Press #, then A or B until the display shows DOWNLOAD-
			ING OFF/ON (current setting).
For this feature to work, the panel must be connected to a phone		3.
line and be programmed with REMOTE ACCESS on, with a Down-			Press 1 (off) or 2 (on). The display flashes the entered
loader phone number, and with a Downloader code.			selection.
		4.	Press # and the display shows the new setting.
Silent Arming (041)			Options (Default = off)
This setting determines whether or not the panel sounds	￿To turn Silent Arming off or on:
status beeps from sirens and the touchpad when the system	1.	Press A or B until the display shows OPTIONS.
is armed.	2.	Press #, then A or B until the display shows SILENT ARMING
Note	3.	OFF/ON (current setting).
When this feature is on, the user does not need to press 5		Press 1 (off) or 2 (on). The display flashes the entered selection.
(SILENT) before arming the system to prevent status sounds.	4.	Press # and the display shows the new setting.

Concord Ultra 58