GE 60-960-95 Ring/Hang/Ring partition 1 0212, partition, Line Fail Delay partition

Ring/Hang/Ring (partition 1: 0212, partition 2: 0222) Phone Options-Partition 1-2 (Default = on)

This setting determines how the panel picks up (seizes) the phone line. Select “on” if an answering machine shares the phone line with the panel. Select “off” if there is no answering machine sharing the phone line with the panel.

Note

The Remote Access setting must be turned on for this feature to work.

When this feature is on, the person who is calling the panel must use the fol- lowing procedure:

1.Listen for one or two full rings.

2.Hang up.

3.Call the premises again within the next 10–40 seconds. The system answers after the first ring.

When this feature is off, the system answers after 12 full rings.

￿To turn Ring/Hang/Ring access off or on:

1.With the display showing RING/HANG/ RING OFF/ON (current setting), press 1 (off) or 2 (on). The display begins flash- ing the entered selection.

2.Press # and the display shows the new setting.

Line Fail Delay (partition 1: 0213)		Phone Options-Partition 1 only (Default = none)
This setting determines the amount of time the	￿To set the Line Fail Delay time:
partition 1 phone line voltage must be absent	1.	With partition 1 selected, press A or B until the display shows LINE
before the panel indicates a phone failure trouble		FAIL DELAY nn SECS (current setting).
condition. If a delay is not programmed (default),	2.	Enter the desired time value (10–240 seconds). The display flashes the
the panel will not monitor the phone line voltage.		entered setting.
Note	3.	Press # and the display shows the new setting.
Line Fail Delay is not available for partition 2 at this	￿To delete the Line Fail Delay time:
time.
	1.	With partition 1 selected, press A or B until the display shows LINE
		FAIL DELAY nn SECS (current setting).
	2.	Press D to delete the current line fail delay time.
Toll Saver (partition 1: 0214, partition		Phone Options-Partition 1-2 (Default = on)
2: 0224)

This setting determines whether the panel answers a phone call on the eighth ring (on) or twelfth ring (off) when a trouble condition exists.

￿To turn Toll Saver off or on:

1.With the desired partition selected, press A or B until the display shows TOLL SAVER OFF/ON (current setting).

2.Press 1 (off) or 2 (on). The display flashes the entered setting.

3.Press # and the display shows the new setting.

Phone Panic (partition 1: 0215, parti-	Phone Options-Partition 1-2 (Default = off)
tion 2: 0225)

This setting determines whether or not a police panic alarm can be activated from a touch-tone phone. When this feature is on, pressing # +

****** from a touch-tone phone on the premises causes a panic alarm.

￿To turn Phone Panic off or on:

1.With the desired partition selected, press A or B until the display shows PHONE PANIC OFF/ON (current setting).

2.Press 1 (off) or 2 (on). The display flashes the entered setting.

3.Press # and the display shows the new setting.

35 Concord Ultra