Phone 3, Phone Number pager 1: 0130, pager 2: 0140, pager

Cellular Backup (cs phone 1: 0107, cs phone 2: 0117, cs	Phones-CS Phone 1-3 (Defaults: CS
phone 3: 0127)	Phone 1 = on, CS Phone 2&3 = off)

This setting determines whether the panel uses cellular communication for reporting if attempts using a landline are unsuccessful.

To turn Cellular Backup off or on:

1.With the display showing CELLULAR BACKUP, press 1 (for off) or 2 (for on). The display flashes the entered setting.

2.Press # and the display shows the new setting.

The following describes how to program the phone settings that appear under PAGER PHONE 1-5.

	Phone Number (pager 1: 0130, pager 2: 0140, pager 3:	Phones-Pager Phone 1-5 (Default = none)
	0150, pager 4: 0160, pager 5: 0170)

	This setting is used for programming a phone number that communicates to	To program a Pager Phone Number:
	a pager. Phone numbers can be 1 to 24 digits long and include pauses, a sky-	1. With the display showing PHONE NUMBER
	link number, and 7-digit PIN number.	_ (or current number), enter the desired
	Note	pager phone number. The display flashes
	Call-waiting services should be disabled to prevent interrupting panel communica-	the entered number.
	tion to the pager(s). To program a dialing prefix that disables call-waiting, see the	2. Press # and the display shows the new set-
	Call Wait Cancel setting under the menu PHONE OPTIONS—GLOBAL.	ting.
	To enter pauses, press C.	To delete a Pager Phone Number:
	To enter *, press and hold 7 for about two seconds.	To delete a Pager Phone Number:
	To enter *, press and hold 7 for about two seconds.	1. With the display showing PHONE NUMBER
	To enter #, press and hold 9 for about two seconds.	1. With the display showing PHONE NUMBER
		(current number), press D. The display
		shows PHONE NUMBER _.

High Level Rpts (pager 1: 0131, pager 2: 0141, pager 3:

0151, pager 4: 0161, pager 5: 0171)

This setting determines whether the following alarm conditions report to a pager:

•Fire, Police, Auxiliary, and Duress alarms

•No Activity

•Receiver Failure (or jam)

•Tamper conditions, including Zone Tampers and System Tamper (40 incorrect key presses or touchpad supervisory)

•Entering or exiting Sensor Test mode

•Phone Test

To turn High-Level Reports off or on:

1.With the display showing HIGH LEVEL RPTS OFF/ON (current setting), press 1 (off) or 2 (on). The display flashes the entered setting.

2.Press # and the display shows the new set- ting.

Low Level Rpts (pager 1: 0132, pager 2: 0142, pager 3:

This setting determines whether the following non-alarm conditions report to a pager:

•Force Armed

•Hardwire Zone Trouble (open or short)

•Supervisory (wireless devices)

•Low Battery (wireless devices)

•Phone Test

•Other non-alarm related conditions

To turn Low-Level Reports off or on:

1.With the display showing LOW LEVEL RPTS OFF/ON (current setting), press 1 (off) or 2 (on). The display flashes the entered set- ting.

2.Press # and the display shows the new set- ting.

Concord Ultra