Kitchen Timer and Control Lockout
Wall Oven
To set the kitchen timer
1Touch KITCHEN TIMER.
2For double wall oven models only, touch UPPER OVEN or LOWER OVEN to select the timer for the desired oven.
3Touch the numbers until the amount of time you want shows in the display. For example, to set 2 hours and 45 minutes, touch 2, 4 and 5 in that order.
1
6
KITCHEN
TIMER
2 |
| 3 |
| 4 |
|
|
|
|
|
|
|
|
|
|
7 |
| 8 |
| 9 |
|
|
|
|
|
START
5
0
4Touch START.
If the set time or the remaining time is greater than or equal to one hour, the screen will show hours and minutes [HH: MM]. The letters “H” and “M” will appear to indicate that the time is in hours and minutes. (If one or more hours was set, the screen will not start to show the time counting down until one minute has passed.)
If the set time or the remaining time is less
than one hour, the screen will show minutes and seconds [MM : SS]. The letters “M” and “S” will appear to indicate that the time is in minutes and seconds.
5When the timer reaches :00, the control will beep 3 times followed by one beep every
6 seconds until KITCHEN TIMER is touched.
The tone can be canceled by following the steps in the
To cancel the KITCHEN TIMER(s), touch PUSH TO CANCEL TIMER.
To reset the KITCHEN TIMER(s), touch PUSH TO CANCEL TIMER and set a new time.
The KITCHEN TIMER can be set from 1 minute to 24 hours.
This timer does not control oven operations.
Control lockout
Your control will allow you to lock out the touch pads so they cannot be activated when touched.
NOTE: On double oven models, this activates the feature for both ovens.
To lock/unlock the controls:
1Touch the CLEAR/OFF pad for 3 seconds, until the screen shows CONTROL LOCKED OUT.
2To unlock the control, touch the CLEAR/OFF pad for 3 seconds, until the home screen appears.
When this feature is on and the touch pads are touched, the control will beep and the display will show CONTROL LOCKED OUT.
CLEAR
OFF
NOTES:
•The control lockout mode affects all controls except for the CLEAR/OFF pad. No other touch pad will work when this feature is activated.
•The adjustment will be retained in memory after a power failure.
25