Installation

3.3 Connection

The DR 5000 has three USB interfaces as a standard feature, located on the back of the instrument (Figure 1).

The USB Type A interfaces are used for communications with a printer, USB memory stick or keyboard. A USB memory stick is used to update instrument software.

The USB Type B interface is used for communications with a PC. The optional Hach Data Trans software (see section 5.2.6.3 on page 31) must be installed on the PC for this use.

A USB hub may be used to connect several accessories at a time.

Note: USB cables must not be longer than 3 meters (10 feet).

These USB interfaces enable data and graphics to be output to a Printer and a PC and upgrade of instrument software (see section 6.8.2 on page 106).

Figure 1 Interfaces

1

USB type A

4

Fuse

 

 

 

 

2

USB type B

5

Plug in power supply

 

 

 

 

3

On/Off switch

 

 

 

 

 

 

14

Page 14
Image 14
Hach DR 5000 user manual Connection, Installation