Advanced Operations
Reading mode:
1.To highlight the required mode, start by pressing Reading mode.
2.Select the required mode, then press OK, then Return to return to the result display.
6.4.2Take single wavelength measurements (single reading)
1.Insert the blank cuvette/cell into the cuvette/sample cell holder. Press Zero.
Note: The Read key is only active after the zero measurement has been completed.
2.Insert the sample cuvette/cell into the cuvette/sample cell holder. Press Read.
3.For data storage, see section 5.3.2 on page 38.
6.4.3Take single wavelength measurements (continuous readings)
1.Insert the blank cuvette/cell into the cuvette/sample cell holder. Press Zero.
Note: In the reading mode ”Continuous“ only the Zero key is shown to start the reading. The reading sequence is started automatically.
2.Insert the sample cuvette/cell into the cuvette/sample cell holder.
3.Press Options and then the Store icon to store the displayed data in the Data Log.
Note: For data storage, see section 5.3.2 on page 38.
89
