Update/edit barcode tests, Program update options | Hach DR 5000

Standard Operations

procedure. Other barcode tests use the reagent test vials to determine the sample blank. Please refer to the Hach procedure for method-specific instructions.

5.5.6 Update/edit barcode tests

5.5.6.1 Manual update of a barcode test

Using the data provided in the barcode, the instrument automatically sets the measurement wavelength and factors. If a discrepancy is detected between the barcode data and the stored data or a new test is identified, the instrument requests an update.

Data types are described in Table 6.

		Table 6 Program update options

	Program point	Description

	Name	Name of the analysis parameter

	Version	An abbreviation assigned by the user or the version number, etc. is entered here

		Exact definition of the test: the number of wavelengths at which measurements are carried out,
	Measurement process	the number of absorbance measurements needed, the keys to be used, any waiting periods
		between measurements, etc.

	Formula	Definition of the evaluation formulas with which the test result is calculated

		The number of variables shown in the display depends on the definition of the measurement
	Variables	process and the formulas. Input of the numerical values of the wavelengths, factors, constants,
		etc.
		This function can be used to enter abbreviations and defined times for up to four timers. Highlight
	Timer 1, Timer 2,	the appropriate line and press Edit.
	Timer 1, Timer 2,	The timers are activated or deactivated with the control boxes on the left of the display. In the
	Timer 3, Timer 4
	Timer 3, Timer 4	next column, a selection can be made from a list of names that describe the corresponding work

		step. In the third column, the times for each active timer are entered.

Enter the Name

Check the working procedure in advance to determine whether this point needs to be changed.

1.Highlight the line containing Name and press Edit. Use the alphanumeric keypad to enter the name indicated in the working procedure.

2.Press OK to confirm.

54

Image 54

Hach DR 5000 user manual Update/edit barcode tests, Manual update of a barcode test, Program update options, Enter the Name

Contents

January 2008, Edition Page Table of Contents Table of Contents 101 Table of Contents Section Specifications Specifications General Information Safety informationPrecautionary labels Use of hazard information Chemical and Biological Safety Source Lamp SafetyGeneral Information Class 1 Laser Overview of product General Information General Information Section Installation Unpack the instrumentOperating environment Installation Connection Cell compartment 1 100 mm adapter optional Multi Cell Holder Top and Bottom Installation Installation Multi Cell Holder Installation Multi Cell Holder Beam path Beam path Start Up Power the instrument on and offChanging the language setting Language selection Start Up Tips for the use of the touch screen Standard OperationsOverview Use of the alphanumeric keypad Standard Operations Main Menu Main Menu options Instrument Setup mode Standard OperationsOperator ID Standard Operations Sample ID Date and time Display and sound preferences Lamp Control VIS-Lamp and UV-Lamp Effect caused by the lamp settings on the Measuring Mode Standard Operations Standard Operations PC and printer Printer setupUSB connector Keyboard Printer Setup Print data Hach Data Trans Password Password deactivation Standard Operations Auto/manual data storage Store, recall, send and delete dataData Log Recall stored data from the data log Send data from the data log To send measurement data to a PC Delete stored data from the data log Data storage from wavelength scan or time course Recall stored data from wavelength scan or time courseSelect Wavelength Scan or Time Course to recall data Send data from wavelength scan or time course Option Press Wavelength Scan or Time Course and then Delete stored data from wavelength scan or time course Stored program options Stored ProgramsSelect a saved test/method enter user-specific basic data Stored programs options Standard Adjust Timer iconReading Mode Options Description Store Off/On Standard Operations Use of program timers Set the reading mode Take single wavelength measurements continuous readings Set the dilution factorTake single wavelength measurements single reading Press OptionsMore…Dilution Factor Run a standard adjust Set the chemical form Change of the default setting of the chemical formPress Save as Default Press OptionsMoreChemical Form Standard Operations Run a reagent blank Measurement/analysis of a reagent blankPress OptionsMoreReagent Blank Standard Operations Analysis of samples Add stored programs to the favorite programs list Barcode Programs Cell compartment #1 Select the measuring range Changing the standard settingStandard Operations Complete a barcode 13 mm test/vial Select the chemical evaluation form Basic test-specific and sample-specific data settings Barcode program options Sample blank Options Description Send Data iconEdit Program update options Update/edit barcode testsManual update of a barcode test Enter the Name Enter the Version Enter the Measurement Process Timer 1, Timer 2, Timer 3 and Timer Option 2 Manual check/revision of test data Update an existing barcode testOption 1 Manual update of test data Press OptionsMoreEdit Upgrade of the instrument software Program a new test Press OK to return to the System Checks menu Standard Operations Advanced Operations User ProgramsProgram a user method Program Name Advanced OperationsProgram Number Program Type Units Single wavelength settingsConcentration resolution number of decimal places Wavelength single wavelength program type Multi wavelength settings Chemical formAbsorbance formula multi-wavelength program type List of available absorbance formulas Wavelength λxConcentration Factor Kx Calibration settings for single and multi wavelength mode Calibration settingsCalibration by entering calibration values Advanced Operations Advanced Operations Advanced Operations Store a user program Additional user-defined parameters and functionsUpper and lower limits of the measuring range Timer 1 / Timer 2 / Timer 3 / Timer Chemical form 2 / chemical form 3 / chemical form Advanced Operations Free programming program type Measurement processDefinitions of the program points Content and definition of the keys Key / Zeroing Enter a new element of a measuring sequence Process Timer key Key / Reading Insert an element of a measuring sequence Enter the calibration formula evaluation formulaDelete an element of a measuring sequence Enter calibration formula C1 Edit formula key descriptions Screen Key DescriptionNew Number Enter the next calibration formula C2 or Cn C2 On Enter variables Save a free programming user programSelect Conc. key Advanced Operations Select a user program 4 Add, edit and delete user programs from the favorites list Add to Favorites EditDelete Favorite Programs Recall a favorite programDelete a favorite program Measures to identify other interference factors Checklist Standard Addition monitoring/checking resultsMethod Check the standard solution Peak volume Standard additionSample volume Complete a standard addition Peak volume/sample volume methods Press OptionsMoreStandard Addition Description of the table of readings Advanced Operations Set up single wavelength mode Single wavelength setup optionsProgram Concentration resolution Concentration factorOptions Description Reading mode Take single wavelength measurements single readingTake single wavelength measurements continuous readings Set the reading mode at different wavelengths Multi-wavelength setup options Absorbance formula Press Absorbance Formula Concentration factor For data storage, see .3.1.1 on Set up the wavelength scan Wavelength scan setup options Setting wavelength Option DescriptionScale & Units Cursor mode Select view displaying tableIntegral Wavelength scan reading Scale & units Press Scale & Units Navigating the wavelength scan Advanced Operations Work with reference scans Highlight Reference 100 Time course of absorbance/transmittance Time course setup parametersTime course setup options 101 Scale & units Time course scan readingTime & interval 102 Analysis of time course data 103 Navigation of a time scan or a time scan analysis Navigating the time scan104 System checks Instrument information105 Advanced Operations Upgrade of the instrument software Optical checks106 Wavelength check 107 Noise check 108 109 Stray light check 110 Absorbance check 111 Drift check 112 Verification kit Press Nominal Values 113 Press Verification 114 Output checks Lamp history115 Advanced Operations Factory service Service time116 Instrument Backup 117 Restore backup data 118 119 120 Spectrophotometer MaintenanceCleaning requirements Display Tungsten lamp replacement Lamp replacementMaintenance 122 Deuterium lamp UV replacement 123 Fuse replacement 124 Filter pad maintenance Filter pad replacement125 Base of DR 5000 with filter grid 126 Section Troubleshooting 127 Troubleshooting 128 Section Replacement Parts 129Description Cat.-No Replacement Parts 130 Contact Information 131 Contact Information 132 Limitation of Remedies Limited WarrantyLimitations 133 Limited Warranty 134 Index 135 136