Henny Penny 680 KFC manual Press and release the Function button and MELT, Mode

Henny Penny			Model 680
SMS SPECIAL PROGRAM	3.	Press and release the Function button and “MELT”, MODE
(Continued)		“CYCLE”, and “100s” shows alternately in the display,
		along	with the period (pulse) length of 4000. This should
		not be changed until the factory is consulted.
	4.	Press and release the Function button twice and “MELT”,
		“ON-”, “TIME”, and “100s”, shows alternately in the
		display, along with the length of time the heat is on. This
		should be set at 1700, and should not be changed until the
		factory is consulted.
	5.	Press and release the Function button three times and
		“COOL”, “SET-”, and “POINT” shows alternately in the
		display, along with the temperature at which the control
		exits	the melt cycle. This is set at 250º F (121º C), and
		should not be changed until the factory is consulted.
	6.	Press and release the Function button four times and
		“AUTO”, and “IDLE” shows alternately in the display,
		along with “OFF”. This should not be changed until the
		factory is consulted.
	7.	Press and release the Function button five times and
		“AUTO”, “IDLE”, and “MMSS” shows alternately in the
		display, along with “0:00”. This should not be changed
		until the factory is consulted.
	8.	The last 3 functions in the Heat Control mode are used by
		the factory only, and should not be changed.

6-36 1005