Henny Penny 680 KFC manual Lid Counterweight Cont’D, Pressure Pad

Henny Penny Model 680

5-11. LID COUNTERWEIGHT (CONT’D)

		NOTE
		The cable should now have some slack in it, with the weights
		level.
	10.	Tighten the nut against the bracket, securing the cable.
	11.	Replace back shroud. Repair is now complete.
5-12. PRESSURE PAD	The pressure pads are plastic strips that the lid cam presses against
	to seal the lid.
	1.	Raise the lid.
	2.	Remove the four screws securing the lid cover and remove
		cover.
	3.	Push the lid cam back, off of the pressure pads.
	4.	Using anAllen wrench, remove large bolt securing the pad.
	5.	Using a Phillips head screw driver, remove the small screw
		securing the pad and remove the broken pad.
		NOTE
		If the pressure pad is worn, but not broken, it can be
		reversed 180 degrees, and the other end of the pad used.

6. Install new pad in reverse order.

5-10 1005