6.Remove air hose.
7.Remove pilot orifice and elbows off of faulty burner.
8.Screw pilot orifice and elbows onto new burner.
Use pipe thread sealant on threads on elements.
9. Remove old insulation from burner area.
10. .Using a gasket adhesive, mount the insulation provided onto the outer surface of burner bracket.
Do not get adhesive onto burner “windows”. It will discolor, blocking the view.
11.Carefully mount burner assembly onto studs and bracket, making sure the insulation seals around burner.
Avoid striking the ignitor while making the installa- tion. Also, do not
12.Fasten condensation deflector onto frame and reconnect gas line into fitting on new burner.
13.Check for gas leaks per section in the installation portion of this manual.
14.Place side panel on unit, turn gas on and electrical supply to unit.
ace | t: Right Burner | 1. | Follow steps 1 thru | 3 on left burner instructions, except |
|
|
| remove right side panel, and drop down drain rod. | |
|
| 2. | Using 3/8” socket, remove nut securing ground wire and | |
|
|
| nuts securing the burner assembly. Drop burner assembly | |
|
|
| from unit. |
|
|
| 3. | Follow steps 6 thru | 15 on the left burner instructions. |
