: Left ‘Burner
I
I
urners are different colors.
1.Remove electrical power supplied to the unit.
Remove electrical power supplied to the unit by unplug- ging the unit, or by turning off the wall circuit breaker, or electrical shock could result.
2.Using l/4” socket, remove both side panels.
3.Locate the air adjustment behind the control panel on each side of the unit.
4.Loosen the nuts securing the slide adjustments.
5.Replace power to unit and turn Power Switch to the “Power” position.
6.While the burners are igniting continously, slide the adjustment shield open or close until both burners are
7.Tighten nuts on adjustment shields and replace side panels.
1.Remove electrical power supplied to the unit.
Remove electrical power supplied to the unit by unplug- ging the unit, or by turning off the wall circuit breaker. Turn off the main gas supply to the fryer and discon- nect and/or cap the main supply line to the fryer, or possible explosion could result.
2.Remove the left side panel of the fryer.
3.Using 11/16” wrench loosen fitting on gas line going to burner, and disconnect gas line.
4.Using a Phillips head screwdriver, remove the two screws securing the condensation deflector onto the frame and remove deflector.
5.Using 3/8” socket, remove nuts securing burner and drop burner off unit.
