The above steps may be followed for interval alarms except you cannot program an interval alarm in the first interval.
Refer to Special Programming Modes on factory presets for load compensation, proportional control, and filter cycle counts.
The following defines the error code number, If an error code occurs, the buzzer will sound until you depress a cycle button. The control will continue to display the error code and fryer will be inoperative until error is corrected.
E 5 - Pot temperature too high. (Software high limit)
PROB - Temperature probe has failed.
E 41 - Control Problem - must be initialized and programmed. (See
E 20 - No Burner Ignition - Check gas flow.
The special programming modes are entered by way of a special sequence of keys and are intended to be infrequently used for service or factory preset functions. The modes are numbered according to the cycle that is selected to enter them.
KFC Parameters (Factory Preset) (Cycle 6)
Test Procedures (Cycle 7)
To enter special programming mode, the following steps must be followed exactly.
1.Enter the password keystroke sequencefor programming mode. Refer to “The Basic Programming Sequence.”
2.Depress the EXIT COOL button. Display will read “SP”.
3.Select the desired special function by depressing either cycle button 6 or 7.
4.Perform the desired operation.
