Although the display will read “COOL” in the stand- by mode, the shortening is hot and could cause burns.
In the event of a power failure, no attempt should be made to operate the fryer. The Model 680 Fryer is equipped with an automatic ignition system and can not be operated without electrical power.
When the operator wishes to filter, move the Power Switch to the “OFF” position and filter as usual (refer to filter instructions). The display should read “COOL” before filtering.
Dropping the shortening while at the “DROP” temperature and not in the “COOL” mode can result in shortening overflowing the cookpot which could cause serious burns, personal injury, fire and/or property damage.
To avoid personal injuries or property damage be sure shortening has been pumped back into the cookpot before depressing the “EXIT COOL” switch. Unit will enter heat mode.
The filter pump motor on the
