Henny Penny 680 KFC Reset Usage, MODE Continued, Speaker Frequency, Codes, Initialize System

Henny Penny		Model 680
SMS SPECIAL PROGRAM		Reset Usage
MODE (Continued)	1.	Press and hold the Function button for two seconds
		until “REG PROGRAM” shows in the display. As soon
		as “REG PROGRAM” shows in the display, press and
		release the Function button 2 times until “RESET USE”
		shows in the display.
	2.	When “CODE” shows in the display, press 1-3-5.
		“DAILY will show in the display, and press any of the
		Product buttons to reset them to 0.
		Factory Presets (F/C, Gas/Electric, Speaker Volume,
		Speaker Frequency, Codes, Initialize System)
	1.	Press and hold the Function button for two seconds until
		“REG PROGRAM” shows in the display. As soon as
		“REG PROGRAM” shows in the display, press and
		release the Function button 3 times until “FAC PRESET”
		shows in the display.
	2.	When “CODE” shows on the display, enter 2957.
		“DEG” and “MODE” flashes in the display. Press any of
		the product buttons to toggle from ºF to ºC, vice versa.
	3.	Press and release the Function button and “TYPE”
		and “FRYR” flashes in the display. Press any of the
		product buttons to toggle from “GAS” to “ELEC”, or vice
		versa.
	4.	Press and release the Function button twice, and “SPKR”
		and “VOL” flashes in the display. The volume can be
		changed from 01 to 10, 10 being the loudest.
	5.	Press and release the Function button 3 times, and
		“SPKR” and “FREQ” will flash in the display. The
		frequency can be set from 100 to 2000.
	6.	Press and release the Function button 10 times, and
		“INTITIALIZE SYSTEM” scrolls across the display.
		Press and hold any of the Product buttons and the display

will count down from 5. Once the display counts down, release the Product button, and the control will set factory preset parameters into the controls.

NOTE

Before attempting to change the other modes in the

Factory Preset mode, please call Technical Service

Department at Henny Penny. 1-800-417-8405.

6-34 1005