Quantum Scale System
Checking Date & Time
QUICK STEPS
From the Start a Run Screen:
1.PRESS [F1]
2.Verify Date & Time is accurate.
3.PRESS [ESC]
To check Date & Time to see that they are correct:
1.From the Start a Run Screen, PRESS [F1].
2.Verify the Date/Time is accurate.
3.PRESS [ESC] to return to the Start a Run Screen.
Changing Date & Time
QUICK STEPS
From the Start a Run Screen:
1.PRESS [F1]
2.TYPE the Current Date
3.PRESS [ENTER] or [▼]
4.TYPE the Current Time.
5.PRESS [F1] - If Needed
6.PRESS [ESC]
To change the Date & Time in the event that it is incorrect:
1.From the Start a Run Screen, PRESS [F1].
2.TYPE the current Date as a
3.PRESS [ENTER] or [DOWN ARROW (▼)] to move the cursor to the Time field.
4.TYPE the current Time. Enter the Time as a
5.If you need to change AM or PM, PRESS [F1] to select the correct time of day.
6.When the Date and Time is correct, PRESS [ESC] to save the changes and return to the Start a Run Screen.
3 - 5 |
