Hobart ML-29048, ML-29191, ML-29044, ML-29188, ML-29039, ML-29035, ML-29037, ML-29032 manual Tip

Models: ML-29032 ML-29037 ML-29188 ML-29035 ML-29191 ML-29044 ML-29039 ML-29048

1 152

Page 33

Quantum Scale System

✎

If you had weight on the scale platter during the Power-up Sequence:

1.Remove the object from the scale platter.

2.PRESS [REZERO] to rezero the scale. After a short delay, Zero Weight should display 0.00 lb.

3.In the event the scale does not rezero, PRESS [ESC].

4.Then, PRESS [POWER] to turn the scale OFF.

5.PRESS [POWER] again to turn the scale ON.

6.If the scale still doesn’t rezero, PRESS the [RESET BUTTON], located on the left side of the scale, to reset the scale.

3 - 3

Start-Up Procedures

Image 33