Quantum Scale System
Entering Operator ID’s
Entering an Operator ID from the Start a Run Screen
QUICK STEPS
From the Start a Run Screen:
1.TYPE your Operator ID
2.PRESS [ENTER]
Entering an Operator ID from a Flashkey Screen
QUICK STEPS
From the Flashkey Screen:
1.PRESS the appropriate “F” key to select the Row.
2.PRESS the appropriate “S” key to select the Column.
When you select a Weigh Type and Totals Type, your system may require an Operator to enter his/her identification number prior to beginning the task.
To enter the Operator ID from the Start a Run Screen:
1.Type your Operator ID number. The Text Cursor Block is highlighted in the Operator ID block, located in the lower right corner of the Start a Run Screen.
2.PRESS [ENTER]. You should now be on the Flashkey Screen or Run Screen depending on your scale
If the Operator ID is not entered from the Start a Run Screen, you may select it or enter it from the Flashkey Screen. Flashkey Screen selections, except Operator ID’s, will be grayed (meaning no selection is available) until you enter your Operator ID.
To select your Operator ID as a Flashkey:
1.PRESS the appropriate [F] key to select the Row of your ID.
2.PRESS the appropriate [S] key to select the Column of your ID. The other Flashkeys on the screen should now be available for selection.
Start a Run Screen | 4 - 8 |
