Hobart ML-29188, ML-29191, ML-29048, ML-29044, ML-29039 manual Selecting Weigh and Totals Types

Quantum Scale System

Totals Types

All Totals Types, except Production, are created by the Supervisor and allow reporting of totals information. As an example, you could keep track of items on sale this week. The list below provides you a list of additional examples for Totals Types you may want to track.

♦Production (See Note)

♦Ad Items *

♦Manager’s Specials *

♦Coupon Items *

Use the ARROW Keys to move the cursor to the appropriate Totals Type.

☛

Note

Production Totals are a permanent part of the scale system (i.e., this Totals Type cannot be deleted). In contrast, the Totals Types marked with an asterisk are examples only. Your supervisor can designate in Configure Totals Types all the Totals Types required for your operation.

Selecting Weigh and Totals Types

Once you’ve determined the Weigh and Totals Types you want to use:

1.PRESS the [UP ARROW (▲)] or [DOWN ARROW (▼)] key to move the cursor up and/or down the list of Weigh or Totals Types to select your choice.

2.PRESS the [RIGHT ARROW ()] key to move the cursor

to the Totals Type column. Pressing the [LEFT ARROW ()] key will move you back to the Weigh Type column.

3.PRESS [ENTER] to select the Weigh and Totals Type required for your operation.

4.You are now at the Flashkey Screen or the Run Screen.

☛Note

If your system is set-up with Flashkeys, when you select a specific Weigh or Totals Type, the scale will send you to the scale’s home position Flashkey screen.

4 - 7 Start a Run Screen