Quantum Scale System
Weigh Types
Wait on a Customer Mode
Processing Random Weight PLU’s
The following section provides a look at the procedures for successfully weighing items and printing labels within each specific Weigh Type (mode of operation). These include:
♦Wait on a Customer
♦PrePackaged Products
♦Print Multiple Labels
♦Production Entry
♦Accumulate Items
♦Verify Fixed Weight
Wait on a Customer is the mode you will use most often. It allows you to simply weigh a product and print a label, or to just print a label for a by count or fixed weight item.
Examples are service counters, such as
For Random Weight PLU’s:
1.Enter your Operator ID (if required).
2.Enter the PLU number (Select Flashkey, Type PLU number or select from the On Screen Library).
3.Place the product on the platter for weighing.
4.PRESS [PRINT] to print a label. When you remove the product, it will automatically return to the Flashkey Screen if configured, to the Start a Run Screen if Operator IDs are required, or it clears the PLU field and remains on the Run Screen.
☛
Canadian Mode Only
Note
If you are operating this scale in the Canadian Mode, Random Weight PLU’s will be processed a little differently than the above description.
If you enter a PLU Number (with or without weight on the platter), you cannot clear that PLU from the system unless you print a label or remove the weight (product) from the scale platter. If you are using Flashkeys, the same applies except that the scale returns to the Flashkey Screen when it clears.
Weigh Types (Modes of Operation) | 6 - 2 |
