Quantum Scale System
Look At This
Do not dampen labels, electronic parts, or connections. Do not allow water to enter the openings in the housing. This could damage the scale system.
Cleaning the Exterior of Scale
Cleaning the Printhead
Carefully clean the exterior of the Quantum Scale System with a clean sponge or cloth and a warm water and detergent solution (i.e., Palmolive green or Ivory liquid dishwashing detergents).
The Printhead should be cleaned approximately once each week, or whenever unclear labels are printed. To obtain a Printhead Cleaning Kit, contact your local Hobart office; request Part Number
Look At This
Do not use a metal tool on the printhead. This could scratch or break the printhead. In addition, labels should not become stuck on machine parts. If they do become stuck, remove the labels at once following the instructions in the Printhead Cleaning Kit.
Cleaning Instructions | 8 - 2 |
