Quantum Scale System
Forced By Count
QUICK STEPS
From the Start a Run Screen:
1.Enter your Operator ID
2.Enter a PLU Number
3.PRESS [ENTER]
4.Type By Count Quantity
5.PRESS [ENTER]
6.Place package on scale
7.Place label on package
8.PRESS [ESC]
Platter Tare
For PLU’s that require a by count quantity, the PLU can be set up to require you to enter a by count quantity. This feature might be used if customers want a product in different quantities. By using the Forced By Count option, only one PLU Number is required.
1.Enter your Operator ID (if required).
2.Enter the PLU Number (Select Flashkey, Type PLU number or select from the On Screen Library). You are now on the Run Screen.
3.PRESS [ENTER] or [DOWN ARROW (▼)]. There is an audible beep and the cursor moves to the Forced By Count field. You cannot do anything else until you enter a valid By Count quantity.
4.TYPE the By Count quantity.
5.PRESS [ENTER] or [DOWN ARROW (▼)]. The cursor then moves to the next active field, Product Number.
6.To complete the transaction, follow the steps for printing a label based on your mode of operation.
During the initial scale
The following explains how you enter the Platter Tare value.
6 - 17 | Weigh Types (Modes of Operation) |
