Hobart ML-29191, ML-29048, ML-29044 manual Removing the Scale Platter, Installing the Scale Platter

Quantum Scale System

Removing the Scale Platter	To remove the Scale Platter:
	1.	Lift up on the front lip of the platter.
	2.	Pull it straight up to remove.

Installing the Scale Platter	To install the Scale Platter:
	1.	Locate the Platter Locating Studs on the bottom of the
		platter.
	2.	Rotate the platter in your hands until the Platter
		Locating Studs are positioned in the upper right-hand
		and lower left-hand corners.
	3.	Line up the Studs with the hole in the center of the
		Rubber Platter Mounts on the sub-platter.
	4.	Gently press the platter into place to make sure that it
		seats.

General Information 2 - 14