![](/images/new-backgrounds/1333100/333100105x1.webp)
Printing booklets
Note | Printing booklets is not supported for Macintosh. |
| You can print booklets on letter, legal, or A4 print media. |
To print booklets
1. Load the print media in the media input tray.
| 2. | In the software program, open the device properties (printer driver). For instructions, see |
|
| To change settings for a print job (Windows) or To change settings for a print job |
|
| (Macintosh). |
| 3. | On the Finishing tab (the Paper Type/Quality tab for some Macintosh drivers), select |
|
| Print on Both Sides. |
| If the Print on Both Sides option is dimmed or unavailable, open the device properties | |
Note | ||
| (printer driver). For instructions, see To change default settings across all programs | |
| (Windows) or To change default settings across all programs (Macintosh). On the Device | |
| Settings tab or the Configure tab, select the option to allow manual duplexing, and then click | |
| OK. Repeat steps 2 and 3. | |
| Not all device features are available for all printer drivers or operating systems. See the device | |
| properties (driver) online Help for information about the available features for the driver. | |
| 4. | Set the number of pages per sheet to two. Select the appropriate binding option, and click |
|
| OK. |
| 5. | Print the booklet. |
| 6. | After side one has been printed, remove the remaining paper from the input tray, and set |
|
| it aside until your booklet job is complete. |
ENWW | Printing booklets 43 |