HP 3020 manual Starting a copy job, Canceling a copy job

Starting a copy job

To make copies with the device, use the following instructions.

1.Load your original document onto the flatbed scanner face-down (one page at a time) with the top, left corner of the document located in the lower-right corner of the glass.

OR

Load your original document face-up into the automatic document feeder (ADF) input tray.

2.If you are using the HP LaserJet 3020 all-in-one, you can press PAPER SIZE to set the copy output size to Letter, Legal, or A4.

3.Press START/COPY on the device control panel to start copying.

4.Repeat the process for each copy.

For more detailed instructions about loading originals onto the flatbed scanner or into the ADF input tray, see Loading originals to copy.

Note	If originals are loaded in the ADF input tray and are also on the flatbed scanner, the device
	automatically scans from the ADF regardless of whether an original has been placed on the
	flatbed scanner.

Canceling a copy job

	To cancel a copy job, press CANCEL on the device control panel. If more than one process is
	running, pressing CANCEL clears the process that currently appears on the device control panel
	display.
	If you cancel a copy job, clear the original document from the flatbed scanner or from the
Note
	automatic document feeder (ADF).

50 Chapter 4 Copying ENWW