HP 4250 manual Cannot communicate with domain controller Level Error

Description: The DNS domain name provided by DHCP was longer than the maximum number of characters allowed or it included invalid characters. As a result, the DNS domain name provided on the TCP/IP and DNS Settings page is being used. If no DNS domain name has been provided, the default value is used.

Action: The administrator should ensure that they have provided a valid and appropriate DNS domain name on the TCP/IP and DNS Settings page.

Cannot communicate with domain controller (200)

Level: Error

Category: Administrative

Description: The domain controller experienced one of the following conditions:

●network problems (cable malfunction, hub, or router problems)

●not on the network

●the IP address or host name specified is not a domain controller

●power is disconnected or interrupted

Action: Check the Domain Membership Status field on the Microsoft Network Settings page (in the web interface under Networking) to verify that the PSA can communicate with the domain controller. If the domain controller the PSA was communicating with is no longer available, the PSA will attempt to find another domain controller from the following:

●the WINS server

●broadcasting on the local subnet

●the DNS server

If the DNS server, WINS server, or Domain Controller is not on the same subnet as the PSA, ensure that the TCP/IP configurations, as entered on the TCP/IP and DNS page (in the web interface under Networking), are configured correctly and that the network infrastructure, such as the default gateway, is configured and is operational.

Cannot communicate with any domain controllers (201)