SNMP Settings Page

Field Name

Description

Enable SNMPv3

Select this to enable SNMPv3. User account information will be saved and

 

restored during a firmware upgrade.

User Name

User name must be between 2 and 32 characters long.

Authentication Key

Must be 32 characters long. Can be numbers 0-9 or characters a-f or A-F.

Privacy Key

Can be numbers 0-9 or characters a-f or A-F.

Engine ID

SNMP v3 engine's administratively unique identifier; used solely for

 

identification, not for addressing.

SNMP Traps: IP Address

Type the IP address of where the trap is being sent.

SNMP Traps: Community Name Type a community name for the trap packet. ("Public" is a common

 

community name.)

SNMP Traps: Port

Specify the port number. (Most SNMP agents receive traps on port 162)

 

 

 

 

 

 

To register for traps, follow these steps:

Page 47
Image 47
HP 4250 manual Snmp Settings, Field Name Description Enable SNMPv3, User Name, Authentication Key, Privacy Key, Engine ID