HP 4250 manual

Application Error

There may be another instance of the HP Add Driver Wizard running on this PC. Close down all instances of the Add Driver Wizard, then try running the Add Driver Wizard again.

Application error:

This application experienced an error

error_description. Try running it again. If the problem persists, consult the help file or the on- line documentation. (Possible errors are listed below.)

●Add printer driver failure

●Printer driver is not compatible with OS

●Insufficient memory

●Can't build driver info from *.inf file

●Initialization setup file queue failure

●Commit setup file queue failure

●Access denied

●Cannot find MFG

●File not found

●Server not found

●Driver not found

Canceling. Please wait...

Download Error: Add Driver Software

There may be another instance of the HP Add Driver Wizard running on this PC or you may be logged to this PC with insufficient privileges. Make sure there are no other instances of the Add Driver Wizard running and verify that you are logged in to this PC with the appropriate access privileges, then try running the Add Driver Wizard again.

Driver could not be initialized:

This driver could not be initialized on the PSA, so it has been disabled for automatic driver download (for example, point and print). Clients will have to supply their own driver.

Try adding this driver again. Add the version of this driver that supports this PC's operating system first. Then add drivers for additional operating systems.

Driver could not be initialized:

This PC has no FILE: port. A file port is required to perform the necessary driver initialization. Please re-install the file port on this PC before adding more drivers to the PSA.

This driver could not be initialized on the PSA, so it has been disabled for automatic driver download (for example, point and print). Clients will have to supply their own driver.

There may be another instance of the HP Add Driver Wizard running on this PC. Make sure there are no other instances of the Add Driver Wizard running, then try running the Add Driver Wizard again.

The application performing the driver installation and initialization has experienced an error. This error may be generated by a variety of problems from network communication issues to .inf file corruption.

Verify the following:

●that the PSA network configuration information are correct and running (for example, WINS server or manually specified domain controller addresses), and

●the provided .inf files are valid printer setup information files and that the correct operating system has been associated with each .inf file.

Try using a different copy of the desired driver or a different driver. If the problem persists, please contact HP support.

Informational.

Self explanatory.

In order for drivers to be deployed to client machines via point and print, the drivers must be properly initialized. If a driver has

failed to initialize it will be disabled by the PSA and cannot be enabled (but it can be re-installed).

A disabled driver may still be associated with a printer, but when a client tries to install that printer the driver files will not be provided by the PSA and the user will be prompted to provide the printer driver files.

In order for driver initialization to run, a FILE: port must be installed on your PC. Because the driver could not be initialized, it has been disabled. Please reinstall the FILE: port and then reinstall this driver.