HP 4250 manual Cposupport

No restore items were selected. Please select at least one item.

No upgrade, backup file was provided with the upgrade, restore request.

No upgrade file was provided with the upgrade request.

No upgrade is in progress.

Not enough disk space. Try again when there are fewer print jobs pending.

Not enough disk space for a restore file. Try again when there are fewer print jobs pending.

Please enter a valid path to the upgrade configuration file, or click Browse to find the saved upgrade configuration file.

Processing the restore, backup file.

Rebooting the device.

Status not available - retrying.

The backup, restore, upgrade failed.

The backup, restore, upgrade is blocked.

The backup file has been restored successfully.

The backup file is ready to transfer.

The configuration file was successfully restored on this PSA.

The restart of the PSA has begun. This system restart will take approximately 5-10 minutes. There will not be any web notification that the system has been restarted.

Click at least one option and then continue the restore process.

Type the file name and path and retry the upgrade or restore process.

No upgrade file was transferred to the PSA. Retype the complete path to the firmware image (for example, "C:\TEMP\UPGRADE.HP") or click Browse to find the saved firmware image.

Retype the file name and path and retry the upgrade process.

If the file name is unknown, access HP's web site and download the upgrade image (http://www.hp.com/

cposupport).

Type the file name and path and retry the upgrade or restore process.

Self-explanatory.

Self-explanatory.

When attempting to restore settings or upgrade the firmware, no configuration or upgrade file was specified. Type the complete path to the file (for example, "C:\TEMP\file.HP") or click Browse to find the saved file or firmware image.

Informational message.

Informational message.

The status is currently not available but will be updated in a few moments.

Reboot the PSA and then retry the backup, restore, or upgrade process.

Reboot the PSA and then retry the backup, restore, or upgrade process.

Confirmation message.

The data has been backed up and is ready to be saved to the specified location.

Confirmation message.

Confirmation message.