HP 4250 manual Driver Management

No toner

Off line

Online

Paper jam

Paused

printing

queued

Service required

spooling

The IP Address you entered is the address of this PSA. Please enter the name or IP address for the printer you wish to add.

The printer hostname you entered is the same as this print server appliance. Please enter the name or IP address for the printer you wish to add.

The printer you selected was not found.

You must specify a printer name for this printer.

You must specify the address of this printer.

You must specify the remote queue name for this printer.

The driver you have selected does not support client side rendering.

NT clients cannot print with drivers using client side rendering. If you have NT clients, do not connect them to this share or go back and deselect client side rendering.

Driver Management Page

Informational message.

Informational message.

Informational message.

Informational message.

Informational message.

Confirmation message.

Confirmation message.

Informational message.

Confirmation message.

Each printer on the network has a unique IP address. This may be the printer's IP address or its DNS hostname. If a DNS hostname is being used, a DNS server address must be specified for the PSA on the TCP/IP and DNS Settings page (on the menu in the web interface under under Networking).

Each printer on the network should have a unique hostname. Retype the name or IP address and make sure it is unique.

An attempt was made to print to a printer that does not exist.

The PSA allows up to 79 characters for the share name. However, for any name over 12 characters, Windows 95/98/ME and older systems might not be able to access the share.

The printer address can only contain alphanumeric characters, spaces, dash (-) underscore (_) plus sign (+) ampersand (&), comma (,) and period (.).

When Other print server is selected, the Remote Queue Name field must be completed. Specify the Remote Queue Name of this printer.

A print share is being created and the client side rendering box is checked but thie driver is not capable of client side rendering.

A print share is being created and the driver selected is capable of client side rendering. This is a warning to not use drivers capable of client side rendering with NT clients.

Message Explanation / Remedy