HP 4250 manual Hardware Installation, Desktop/Rack Shelf/Under-Printer Installation

Hardware Installation

Links within this document:

Desktop/Rack Shelf/Under-Printer Installation

Rackmount Installation

Cable Connections

Troubleshooting the Appliance

Links to related documents:

Troubleshooting the Appliance

This document explains how to connect the components of the appliance. When installing the hardware for the appliance, be certain to carefully follow all instructions to ensure the proper connection and function of the appliance.

Desktop/Rack Shelf/Under-Printer Installation

Use the following procedure to perform the desktop/rack shelf/under-printer installation:

CAUTION: For under-printer installation, the appliance can support printers that weigh up to 60 pounds. Do not place heavier printers on the appliance.

1.Turn the appliance so it rests on its top.

2.The appliance ships with a set of four self-adhesive rubber "feet" on a paper backing sheet. Remove each foot from the paper backing. Install each foot on the bottom of the appliance in the indentation provided. Press each foot firmly into place.

3.Turn the appliance over so it rests on its rubber feet.

4.Locate the appliance for easy access to a power source and network connection. It may be located on any solid surface, in a rack shelf, or under a printer.

5.Connect cables.

Rackmount Installation

The appliance may be rack-mounted into industry-standard instrument/computer racks. The appliance is shipped with a pair of rack-mount brackets with four screws. There are also four screws for mounting the brackets to the appliance in the rack.

The appliance requires 1.5 rack units (RU) of vertical space. It does not require rails for rack mounting.